Construction quality
On each construction project, Beodom works with proven products and solutions. Construction quality starts by choosing the right materials and by establish long lasting collaboration with the right companies. We present here a selection of important solutions we chose to make better constructions.
Monolithic wall system (POROTHERM/KLIMABLOC)
In a monolithic wall system, construction blocks, made of clay, fulfill both static and thermal insulation function. Blocks provide sturdiness, excellent thermal insulation, healthy indoor climate and very good thermal inertia.
Comparison of POROTHERM 38 S P+E PLUS, POROTHERM 30 S P+E PLUS and a standard clay block (photo Beodom).
For external walls, Beodom uses the block 38 which makes wall 38cm thick. Beodom used Wienerberger POROTHERM and now use Zorka Opeka KLIMABLOC.
Comparative size and internal structure of Wienerberger POROTHERM 38 S P+E PLUS (left) and Zorka Opeka KLIMABLOC 38 (right) (photo Beodom).
Detail of a corner element in a wall of POROTHERM 38 S P+E PLUS (photo Beodom).
Related articles
-
A visit to Pichler Klimabloc production facility in Wels, Austria
24 July 2010 -
SEEBBE 2010: Rehau, Zorka Opeka, Liapor and energy efficiency conference
24 April 2010 -
Raising walls of Amadeo II with Klimabloc
23 March 2010 -
External walls of Amadeo II ground floor with Klimabloc
19 January 2010 -
Building with POROTHERM - visual guide - lintels
25 May 2009 -
SEEBBE 2009: Rehau, Xella, Wienerberger, Zorka Opeka
25 April 2009 -
Zorka Opeka KLIMABLOC: a promising new competitor to POROTHERM
03 October 2008 -
Building with POROTHERM - visual guide - corners
27 September 2008 -
Building with POROTHERM - visual guide - basics
16 September 2008 -
Raising walls of Amadeo's ground floor with POROTHERM
25 August 2008 -
Wienerberger team visits Amadeo construction site
12 August 2008 -
Building the first POROTHERM walls for Amadeo
10 August 2008
Roofing system with Decra-Octava
Beodom uses Decra-Octava stone coated steel tiles for the roof of its constructions. Decra-Octava, manufactured in Denmark by Icopal, are extremely resistant and durable.
Installation of Decra-Octava on Amadeo's roof (photo Beodom).
Decra-Octava tiles have a core of zinc aluminium galvanised steel, protected with a multi-layered coating system. The surface is covered with a stone granular coating which provide protection and natural color. The tiles are dryfixed on the roof. They are guaranted for 30 years.
Decra-Octava installed on Amadeo's roof (photo Beodom).
Roof underlay with Icopal Monarperm 500
For the roof underlay we use a breathable polypropylene layer from Icopal, Monarperm 500, which reduces wind load and provides a secondary water-shedding layer against the wind-driven rain or snow.
Installation of Monarperm 500 on Amadeo's roof (photo Beodom).
Monarperm 500 installed on Amadeo's roof (photo Beodom).
Waterproofing with Index membranes
Beodom builds with Index waterproofing membranes from Italy. Index membranes are vastly superior in quality than the typical bitumen membrane used in Serbia. Index proposes very sturdy, reinforced, SBS membranes for foundations together with complete solution for waterproofing of flat roofs.
Installation of Index Testudo Spunbond waterproofing membrane on a base slab (photo Beodom).
Installation of Index Testudo Spunbond waterproofing membrane on underground parking walls (photo Beodom).
Construction quality
